Firmware Upgrade - Planet GSW-1602SF User Manual

Hardware Reset button

4.14.3 Firmware Upgrade

The Firmware Upgrade page contains fields for downloading system image files from the Local File browser to the
device.
To open Firmware Upgrade screen perform the folling:
1. Click Tools -> Firmware Upgrade
2. The Firmware Upgrade screen is displayed as in Figure 4-53.
3. Click the "Browse" button of the main page, the system would pop up the file selection menu to choose firmware.
4. Select on the firmware then click "Upload", the Software Upload Progress would show the file upload status.
5. Once the software be loaded to the system successfully. The following screen appears. Click the "Yes" button to
activate the new software immediately. The system will load the new software after reboot.
Figure 4-53 Firmware Upgrade screen
Figure 4-54 Software successfully loaded notice screen
-62-