Routing Setup; Nat Disabled - EnGenius EBC10v2 User Manual

B N S
ASIC ETWORK ETTINGS

6.9.9 Routing Setup

Typically static routing does not need to be setup because the EIR900 has adequate routing information after it has been con-
figured for Internet access. Static routing is only necessary if the router is connected to network under a different subnets.
Note:
To enable a static routing, NAT must be disabled.

NAT Disabled

Click Enable or Disable to activate or deactivate Static
Routing.
6-94
R S
OUTING ETUP