EnGenius EBC10v2 User Manual page 137

B N S
ASIC ETWORK ETTINGS
Trigger Type Select the protocol to use for port triggering
z
from the following: TCP, UDP or Both.
Public Port Enter the inbound port(s) for the application
z
in the following format: 2300-2400 or 47624.
Public Type Select the protocol to use for the inbound
z
port from the following: TCP, UDP or Both.
Click Add to append a new configuration to the table or
Reset to discard changes.
Current Port Triggering Table
The list of current port triggering configurations.
Click Delete Selected to remove selected devices from
the list.
Click Delete All to remove all devices form the list.
Click Reset the discard changes.
Click Apply to save the settings or Cancel to discard
changes.
6-86
P T S
ORT RIGGERING ETUP