Configuring Advanced Settings - EnGenius EBC10v2 User Manual

B N S
ASIC ETWORK ETTINGS

6.4.2 Configuring Advanced Settings

Advanced settings parameters available on the router.
WARNING!
!
Incorrectly changing these settings may cause the device to stop functioning. Do not modify the settings in this
section without a thorough understanding of the parameters.
Fragment Threshold
z
packet during data transmission. A value too low could
lead to low performance.
RTS Threshold Enter the RTS threshold. If the packet
z
size is smaller than the RTS threshold, the EIR900 will
not use RTS/CTS to send the data packet.
Beacon Interval Enter the beacon interval. This is the
z
amount of time that the EIR900 will synchronize the net-
work.
Delivery Traffic Indication Message (DTIM) Period
z
Enter the DTIM period. The DTIM is a countdown period
informing clients of the next point of broadcast and multi-
cast of messages over the network. Valid values are
between 1 and 255.
Enter the maximum size of a
6-42
C A S
ONFIGURING DVANCED ETTINGS