Getting Started; Setup Notes; Accessing The Firmware - EnGenius EBC10v2 User Manual

E G Q S
N ENIUS UICK TART

3.2 Getting Started

Note:
Before getting started power off the cable or DSL modem.

Setup Notes

When considering the placement of the EIR900 remember the following:
It must be located close to a DSL or Cable modem.
z
It must be close to an electrical outlet.
z
Upon first setup, it must be close to the computer that is used to set up and configure the router.
z
For optimal wireless access place the router in the center of the room, at a high altitude and with an unobstructed view
z
of the other wireless devices.
Other electronic devices can interfere with the wireless frequency of the router and reduce the wireless access range.
z

Accessing the Firmware

There are two ways to access the EIR900 configuration firmware: from a CD-ROM or a web browser.
3-4
G S
ETTING TARTED