Linksys WRVS4400N Manual page 65

VLAN & QoS
This screen allows you to configure the Qos and VLAN settings for the Access Point. The
QoS (Quality of Service) feature allows you specify priorities for different traffic. Lower
priority traffic will be slowed down to allow greater throughput or less delay for high
priority traffic. The 802.1Q VLAN feature is allowing traffic from different sources to be
segmented. Combined with the multiple SSID feature, this provides a powerful tool to
control access to your LAN
VLAN
Enabled/Disabled VLAN. You can enabled this feature only if the hubs/switches on your
LAN support the VLAN standard.
AP Management VLAN. Define the VLAN ID used for management.
VLAN ID. Enter the VLAN ID.
QoS
U-APSD(WMM Power Save). Select Enabled or Disabled as required.
WMM. Wi-Fi Multimedia is a QoS feature defined by WiFi Alliance before IEEE
802.11e was finalized. Now it is part of IEEE 802.11e. When it is enabled, it provides
four priority queues for different types of traffic. It automatically maps the incoming
packets to the appropriate queues based on QoS settings (in IP or layer 2 header). WMM
provides the capability to prioritize traffic in your environment. The default is Enabled.
Change these settings as described here and click Save Settings to apply your changes, or
click Cancel Changes to cancel your changes. Help information is displayed on the
right-hand side of the screen.