Firewall Tab - Linksys WRVS4400N Manual

•Basic Settings. Choose the wireless network mode (e.g. B/G/N-Mixed), SSID, and radio channel on this
screen.
•Security Settings. Use this screen to configure the built-in access point's security settings.
•Connection Control. Use this screen to control the wireless connections from client devices to the Router.
•Advanced Settings. Use this screen to configure the built-in access point's more advanced wireless settings
(e.g. Tx Rate Limiting, Channel Bandwidth, etc.).
•VLAN & QoS. Use this screen to configure the 802.1Q VLAN and the QoS (Quality of Service) settings.
•WDS. Use this screen to configure WDS (Wireless Distribution System) settings.
Firewall
You will use the Firewall tabs to configure basic firewall settings, IP access list, and Network
Address Port Translation settings for your network's security.
•Basic Settings. Basic Firewall settings are configured from here.
•IP Based ACL. Define IP based Access List to block specific hosts, networks, and protocols (services).
•Internet Access Policy. This screen defines the time schedule to allow or block complete Internet access or
to specific URLs from the Router.
•Single Port Forwarding. Use this screen to set up public services or other specialized Internet applications
with a single port on your network.
•Port Range Forwarding. Use this screen to set up public services or other specialized Internet applications
on your network using a port range.
•Port Range Triggering. Use this screen to set up triggered ranges and forwarded ranges to allow special
Internet applications to pass through this NAT Router.
•Service. Use this screen to define customized IP applications based on TCP or UDP. The user-defined
service type will be available when defining IP based ACL rules.
VPN
You will use VPN tabs to configure VPN tunnels and accounts to establish a secured channel through
Internet.
•Summary. This displays the Summary of IPSec tunnel Status..
•IPSec VPN. The VPN Router can create one or multiple tunnels (or secure channel) that each connect
between two endpoints, so that the transmitted data or information between these endpoints is secure.
•VPN Client Accounts. Use this screen to designate VPN clients and their passwords.
•VPN Pass Through. This tab allows you to disable IPSec Passthrough, PPTP Passthrough, and L2TP
Passthrough.