Linksys WRVS4400N Manual page 33

may need to enter additional information in order to connect to the Internet through an
ISP (Internet Service Provider) or broadband (DSL, cable modem) carrier.
Summary
System Information
Firmware version Displays the Router's current software version.
CPU Displays the Router's CPU type.
System up time Displays the length of time that has elapsed since the Router was last
reset.
DRAM Displays the amount of DRAM installed in the Router.
Flash Displays the amount of flash memory installed in.
Port Statistics
This section displays the following color-coded status information on the Router's
Ethernet ports:
•
Green Indicates that the port has a connection.
•
Black Indicates that the port has no connection.
Network Setting Status
LAN IP Displays the IP address of the Router's LAN interface.
WAN IP Displays the IP address of the Router's WAN interface. If this address was
assigned using DHCP, click DHCP Release to release the address, or click DHCP Renew
to renew the address.
Mode Displays the operating mode, Gateway or Router.
DNS 1-2 The IP addresses of the Domain Name System (DNS) server(s) that the Router
is using.
DDNS Indicates whether the Dynamic Domain Name System (DDNS) feature is enabled.
DMZ Indicates whether the DMZ Hosting feature is enabled.