Advanced Ip Filtering Page - Motorola SURFboard SVG1202 User Manual

Advanced IP Filtering Page

Define which local computers will be denied access to the SVG1202 WAN by configuring IP address
filters to block Internet traffic to specific network devices on the LAN. You enter the LSB (Least-
significant byte) of the IP address; the upper bytes of the IP address are set automatically from the
SVG1202 Configuration Manager's IP address.
You can store filter settings commonly used but not have them active.
FIELD
Start Address
End Address
Enabled
Click Apply to activate and save your settings.
SVG1202 Wireless Voice Gateway • User Guide
Field Descriptions for the Advanced IP Filtering Page
DESCRIPTION
Enter the starting IP address range of the computers you want to deny
access to the SVG1202 WAN.
Enter only the least significant byte of the IP address.
Enter the ending IP address range of the computers you want to deny
access to the SVG1202 WAN.
Enter only the least significant byte of the IP address.
Activate the IP address filter.
Select each range of IP addresses you want to deny access to the
SVG1202 WAN.
B
24