Motorola SURFboard SVG1202 User Manual page 14

•
It is recommended that you mount the gateway to concrete, masonry, a wooden stud, or some
other solid wall material. Use anchor bolts if necessary (for example, if you mount the unit on
drywall).
4. Position and secure the wall mounting template on the wall to mark the holes.
5. Select an appropriate depth and diameter to drill the holes to a depth of at least 1½ inches (3.8 cm).
Note: There must be .10 inch (2.5 mm) between the wall and underside of the screw head.
6. Insert the #6 screws in the holes and then attach the gateway.
7. Verify the gateway is still securely attached to the wall.
8. Reconnect the coaxial, Ethernet, power cables.
9. Plug the power cord into an electrical outlet.
10. Arrange the cables to prevent any safety hazards.
SVG1202 Wireless Voice Gateway • User Guide
B
6