Nuvo NV-P100 Manual page 7

NV-P3100 Features
1. Ethernet: The NV-P3100 is designed to connect directly to the network. The
second port enables multiple P3100's to share the same network connection
within one system.
2. Speaker: This modular connection provides a maximum 40 watt stereo amplified
signal to the connected speakers. Each zone represents an independent output.
3. Line In: This 3.5mm stereo input will accept any analog line level audio signal.
The local audio source is amplified by the local Player, as well as providing it as
an additional source selection in any other associated audio zones within the
Player Portfolio System. Each zone represents an independent input.
4. Trigger In: This 3.5mm input acts as an input control from external equipment.
Each zone represents an independent input.
5. Line Out: This 3.5mm stereo output provides the local line level audio signal to
an additional amplifier, powered subwoofer, or headphones. Each zone
represents an independent output.
6. Trigger Out: This 3.5mm output acts as a voltage trigger for external equipment.
Each zone represents an independent output.
7. USB: Any USB enabled hard drive can share music content with the Player
Portfolio System through this port. zone represents an independent input.
8. Setup: This button is used for each of the Zone sections in the setup process to
associate the zone control with the network.
9. AC Input: The universal power supply will accept 100 – 240VAC, 50-60Hz.
7