Nuvo NV-P100 Manual page 6

NV-P200 Features
1. Ethernet: This RJ-45 port allows for a wired connection directly to the NV-
GW100 Gateway or directly to the network router.
2. USB: Any USB enabled hard drive can share music content with the Player
Portfolio System through this port.
3. Audio In: This 3.5mm stereo input will accept any analog line level audio signal.
The local audio source is amplified by the local Player, as well as providing it as
an additional source selection in any other associated audio zones within the
Player Portfolio System.
4. Audio Out: This 3.5mm stereo output provides the local line level audio signal to
an additional amplifier, powered subwoofer, or headphones.
5. Setup Mic: This 3.5mm input is designed for the Audyssey® calibration mic.
Audyssey features a room equalization algorithm built-into the Player Portfolio
user control. This calibration is very useful for compensating for poor room
acoustics or speaker placement. The Audyssey mic is sold separately.
6. Left and Right Speaker Outputs: These binding posts provide an amplified
local audio signal to any connected speakers. The maximum output of the NV-
P200 is 120 watts stereo.
7. AC Input: The universal power supply will accept 100 – 240VAC, 50-60Hz.
.
6