Advertisement
3.1.6 Removing the front cabinet assembly
(See Figs.9 to 11)
• Remove the top cabinet and CD deck assembly.
(1) From the top side of the main body, remove the screw N at-
taching the earth wire on the bottom cabinet. (See Fig.9.)
(2) Disconnect the card wire from the connector
main AMP board. (See Fig.10.)
(3) Disconnect the wire from the connector
AMP board. (See Fig.10.)
(4) From the both sides of the main body, remove the two
screws P attaching the front cabinet assembly. (See
Fig.11.)
(5) From the both and bottom sides of the main body, release
the joints (c, d) and then take out the front cabinet assem-
bly from the main body in the direction of the arrow. (See
Figs.11.)
1-8 (No.MB508)
CN101
on the
CN102
on the main
Front cabinet assembly
Bottom cabinet
N
Fig.9
Main AMP board
Fig.10
c
P
Bottom cabinet
Fig.11
CN101
CN102
Front cabinet assembly
d
d
Advertisement
