Reset - Planet WAP-4035 User Manual

process is complete, we suggest you to power off/on WAP-4035 to make the new
firmware effect.
3.10

Reset

You can reset the WAP-4035 system if necessary. The reset function essentially reboots your
WAP-4035 system.
Parameter Description
Reset In the event that the system stops responding correctly or in some way stops
functioning, you can perform a reset. Your settings will not be changed by reset
procedure. To perform the reset, click on the Apply button. You will be asked to
confirm your decision. Once the reset process is complete you may start using the
Access Point again.
37