Table of Contents
Advertisement
If WAP-4033 is installed in an 802.11b and 802.11g mixed WLAN, its performance will reduced
significantly. Because every 802.11g OFDM packet needs to be preceded by an RTS-CTS or CTS
packet exchange that can be recognized by legacy 802.11b devices. This additional overhead
lowers the speed. If there are no 802.11b devices connected, or if connections to all 802.11b devices
are denied, the WAP-4033 can operate in 11g-only mode, and its data rate should actually 54Mbps.
1.5
Reset Button
WAP-4033 provides a Reset button on the rear panel for user to restart or set WAP-4033 configuration to
factory default.
Time
Press less than 5 Sec.
Press more than 5 Sec.
Active
WAP-4033 will re-boot itself, keeping your original configurations
WAP-4033 will reset itself to the factory default settings
9
Hide quick links:
Advertisement
Table of Contents
