Security Setting Of Bridge Mode - Planet WAP-4035 User Manual

You may press "Refresh" to get the new client table or "Close" to close this dialog
box.
WLAN MAC Keep default setting: WAP-4035 will use it's own MAC address to access the
wireless LAN.
Press "MAC Clone" button: It will use PC's MAC address to access the wireless
LAN.
In "Universal Repeater mode", this device can act as a station to connect to
Root AP SSID
a Root AP. You should enter the SSID of the Root AP here.
After configuration complete, please click "Apply" button to save the configuration. Then you will
see a screen to prompt you the settings are save successfully. You may press "Continue" for
configure other settings or "Apply" to restart WAP-4035 with new configuration.
3.2.8

Security setting of bridge mode

In "AP Bridge-Point to Point mode", "AP Bridge-Point to Multi-Point mode" and "AP Bridge-WDS
mode", you can click "Set Security" to add encryption for the communication between the
bridged access points. This can protect your wireless network.
22