Step 10: Level the dishwasher
IMPORTANT:
1 Open the door, then place a level on the door and on the rack track inside the tub to make sure that the
dishwasher is level.
Check front-to-back level
2 Level the dishwasher by adjusting the four leveling legs individually.
Tip: Pull the lower rack out about halfway. Make sure that the rack does not roll forward or back into the dishwasher. If
the rack rolls in either direction, you must level the dishwasher again.
3 If the door hits the tub, the dishwasher is not installed correctly. Adjust the leveling legs to align the door to
the tub.
You'll need:
16
NS-DWH2BS8/NS-DWH2SS8/NS-DWR2BS8/NS-DWR2WH8/NS-DWR2SS8
The dishwasher must be level for proper dish rack operation and wash performance.
Adjustable wrench
www.insigniaproducts.com
Check side-to-side level
Turn the legs to adjust the level
Level