6235/6235i/6236i (RM-60)
RF Description and Troubleshooting
Description/Field
Pout w/AAS-10 at Ant. Conn.
12. Click Read Phone to update the values.
PCS Setup
Use the following procedures to prepare for PCS Tx troubleshooting using Phoenix.
1. Connect an RF test connector to a call box.
2. Connect the mobile terminal to the PC via a test jig. (The bottom connector is a
USB port.)
3. Connect a power supply to the mobile terminal.
4. Open the Troubleshooting menu, and point to Phone Control.
The Phone Control dialog box appears. (See
5. Click the LOCAL button in the Phone State area to put the mobile terminal into
Local Mode.
6. Open the Troubleshooting menu, point to RF, and click RF Main Mode.
The RF Main Mode dialog box appears. (See
Page 16
Table 2: RF PDM Values
Figure 12: RF PDM Control dialog box for Cell band
©2005 Nokia Corporation
Reference Value
-8 dBm
Figure 7
on page 11.)
Figure 10
on page 14.)
Company Confidential
Issue 1 04/2005