Nokia Customer Care
7. Select the following values on the RF Main Mode dialog box:
Band = PCS (CDMA)
•
Channel = 600
•
Mode = Rx/Tx
•
8. Click Set.
Note: Be sure that the "RF Main Mode set successfully" message appears in
the status bar.
9. Open the Troubleshooting menu, point to RF, and click CDMA Control.
The CDMA Control dialog box appears. (See
10. Select the following values on the CDMA Control dialog box.
State = Rho ON
•
Band = PCS
•
Radio Configuration = Mode 1: IS-95 Voice
•
Note: Do NOT select the Set default PDM values option.
11. Click Execute.
12. Open the Troubleshooting menu, point to RF, and click PDM Control.
13. Configure the spectrum analyzer using the following values:
•
Center Frequency = 1880 MHz
•
Span = 100 MHz
•
Amplitude = 20 dBm
•
Attenuation = Auto
•
BW = Auto
Description/Field
AGC1
AGC2
PA Gain
Rx IF AGC
AFC
Pout
Current
Pout w/AAS-10 at Ant. Conn.
Issue 1 04/2005
Table 3: RF PDM Values
©2005 Nokia Corporation
6235/6235i/6236i (RM-60)
RF Description and Troubleshooting
Figure 11
on page 15.)
Reference Value
0
-512
+207
0
0
+8dBm
300mA
-8dBm
Company Confidential
Page 17