Removing The Top Cover; Removing The Roller - JVC KW-XG56TU Service Manual

3.2.2 Removing the top cover (See Fig.3 to 5)
• Remove the MECHANISM CONTROL BOARD assembly.
(1) From the front side of the CD MECHANISM assembly,
change the hook position of the two roller springs. (See
Fig.3.)
Top cover
Roller spring Roller spring
(2) From the side of the CD MECHANISM assembly, remove
the six screws B attaching the top cover. (See Fig.3 and 4.)
Top cover
B
B
Fig.3
B
Fig.4
(3) Take out the top cover in an upward direction. (See Fig.5.)
3.2.3 Removing the roller (See Fig.6)
• Remove the MECHANISM CONTROL BOARD assembly and
top cover.
(1) From the bottom side of the top cover, remove the screw C
attaching the gear holder.
(2) Remove the R.holder assembly from disc plate, and then
take out the roller from R.holder assembly in the direction
of the arrow.
Reference:
When attaching the R.ACT gear (2) and R.ACT gear (3),
apply grease to the section d of R.holder assembly.
C
Gear holder
Roller gear
R.ACT gear(3)
R.ACT gear(2)
Top cover
Top cover
Fig.5
Roller coller
Washer
Roller
d
R.holder assembly
Disc plate
Fig.6
(No.MA471<Rev.005>)1-11