Planet 802.11g Wireless Access Point / Bridge WAP-4000 User Manual page 25

802.11g wireless access point/bridge

Hide thumbs Also See for 802.11g Wireless Access Point / Bridge WAP-4000:

Table of Contents

3.2.2.3 IP Settings

Fix IP Address: You may give a fixed IP address to WAP-4000 manually by choosing this radio

button.

IP Address: Set an IP address for the AP.

Subnet mask: Set the Subnet Mask for the AP.

Gateway: The IP address of a gateway device necessary for communication with devices

outside the subnet of the Access Point. If your network is not divided onto different subnets, this

can remain blank.

DHCP Client: If there is a DHCP Server in your LAN, you can select DHCP Client to let the

WAP-4000 be a client to get an IP address from your DHCP server.

DHCP Server: Enable or disable DHCP server function of WAP-4000. When DHCP server is

enabled, you can specify the IP range and DNS server IP fields below.

- 20 -

Table of Contents