Planet 802.11g Wireless Access Point / Bridge WAP-4000 User Manual page 19

802.11g wireless access point/bridge

Hide thumbs Also See for 802.11g Wireless Access Point / Bridge WAP-4000:

Table of Contents

Enable/Disable: Enable or disable 802.1X authentication of WAP-4000.

Encryption Key: Select one of the Encryption key length options. It should be set the same length

as WEP key. Select one of the Encryption key lifetime options. Once the lifetime expires, RADIUS

server will renew the Encryption key.

RADIUS Server 1: Enter the IP address, communicate port number, and shared secret key of your

primary RADIUS server.

RADIUS Server 2: Enter the IP address, communicate port number, and shared secret key of your

secondary RADIUS server.

Note: As soon as 802.1X authentication is enabled, all the wireless client stations that are connected

to the AP currently will be disconnected. The wireless clients must be configured manually to

authenticate themselves with the RADIUS server to be reconnected.

- 14 -

Table of Contents