Important Safety Instructions - Planet 200Mbps Powerline Ethernet Bridge PL-501-EU/US/UK Quick Installation Manual

200mbps powerline ethernet bridge
Table of Contents

Advertisement

Important Safety Instructions

This product is intended for connection to the AC power line.
The following pre-cautions should be taken when using this
product:
Please read all instructions before installing and operating this
ó
product.
Please follow all warnings and instructions marked on the
ó
product.
Do not operate this product near water.
ó
This product should never be place near or over radiator, or
ó
heat register.
This product relies on a building's electrical installation for
ó
short-circuit (over current) protection.
Ensure that a fuse or circuit breaker is used on the phase
ó
conductors (all current-carrying conductors).
Do not allow anything to reset on the product interconnect
ó
cords.
Do not locate this product where people may walk on the
ó
cords.
The power cord should be plugged directly into a specification
ó
AC wall outlet.
Only a qualified technician should service this product. Opening
ó
or removing covers may result in exposure to dangerous
voltage points or other risk.
Unplug this product from the wall outlet and refer the product
ó
to qualified service personal for the following conditions:
1. When the interconnect cords are damaged or frayed.
2. If liquid has been spilled onto the product.
3. If the product has been exposed to rain or water.
4. If the product does not operate normally when the operating
instructions have been followed.
5. If the product exhibits a distinct change in performance.


Advertisement

Table of Contents
loading

This manual is also suitable for:

Pl-501-euPl-501-usPl-501-uk

Table of Contents