Table of Contents
Advertisement
After connected E1/T1 & Ethernet cables into the VIP-2100, turned on
the power. The first step is to logon the system and set up the IP address.
Before you can use the Browser to setup VIP-2100, you need to have
Java Standard Runtime (1_4_1_02) to make it work. Please refer to
Appendix 2 Java plug-in Install
Logon VIP-2100
Setp1: Start IE5.0 (or later version) to navigate VIP-2100 Management
System by typing the default IP address (the default URL is
http://192.168.111.111:10087). The screen will display User ID and
Password as figure 2.1-1.
☻Note: The default network IP address is 192.168.111.111 and subnet
mask is
255.255.0.0
Step 2: Enter log user name and password (the
user password is
(refer to Section
VIP-2100 User's manual
Chapter 2 Logon VIP-2100
for detail.
Figure 2.1-1
root). You can manage your user account via web
"Account
Manager") later.
Figure 2.1-2
- 11 -
default user id is root
and
Advertisement
Table of Contents
