Table of Contents
Advertisement
3. Select the Dial-in tab, and enable Allow access. Click OK.
4.6 802.1x Client Setup on Windows XP
Windows XP ships with a complete 802.1x client implementation. If using Windows
2000, you can install SP4 (Service Pack 4) to gain the same functionality.
If you don't have either of these systems, you must use the 802.1x client software
provided with your wireless adapter. Refer to the documentation of your wireless
adapter for setup instructions.
The following instructions assume that:
•
You are using Windows XP
•
You are connecting to a Windows 2000 server for authentication.
•
You already have a login (User name and password) on the Windows 2000 server.
4.6.1 Client Certificate Setup
1. Connect to a network which doesn't require port authentication.
2. Start your Web Browser. In the Address box, enter the IP address of the Windows
2000 Server, followed by /certsrv
For example: http://192.168.1.2/certsrv
3. You will be prompted for a user name and password. Enter the User name and
Password assigned to you by your network administrator, and click OK.
41
Advertisement
Table of Contents
