Preparation Of Chassis - LG LW2512ER Owner's Manual

Installation
NO. NAME OF PARTS Q'TY
1 FRAME CURTAIN 2
2 SUPPORT BRACKET 2
3 SILL BRACKET 2
4 LOCK NUT 4
5 SCREW (TYPE A) 11
6 SCREW (TYPE B) 7
7 SCREW (TYPE C) 5
8 SCREW (TYPE D) 2
9 CARRIAGE BOLT 2
10 FOAM STRIP 1
11 FOAM SEAL 1
12 WINDOW LOCKING BRACKET 1
13 DRAIN PIPE 1
14 FRAME GUIDE 2
SCREWDRIVER(Phflips and Flatead), RULER, KNIFE, HAMMER, PENCIL, LEVEL ]
PREPARATION OF CHASSIS
1. Remove the screws which fasten the cabinet at
both sides and at the back. Screws
2. Slide the unit from the cabinet by gripping the
base pan handle and pulling forward while bracing
the cabinet.
3. Cut the window sash seal to the proper length.
Peel off the backing and attach the Foam-Seal @
to the underside of the window sash.
4. Insert the Frame Guides 4b into the bottom of the
cabinet.
5. Insert the Frame Curtain O into the Upper Guide
and Frame Guides Q.
6. Fasten the curtains to the unit with 10 Type
A screws 6).
(Type A) __
12 Room Air Conditioner