Preparation Of The Chassis - LG LW5024 Owner's Manual

Preparation of the Chassis

1
Assemble two supporters with upper guide.
Align holes between the upper guide and the
top of the cabinet and then install it with 3 type
A screws.
Screws (Type A) Screws (Type A)
NOTE
• The feature may be changed according to the
type of model.
2
Slide the Side curtain directly into the cabinet.
Insert the top and bottom rails of the curtain
panels into the upper and lower panel guides.
Left Left
Curtain Curtain
Panel Panel
NOTE
• The feature may be changed according to the
type of model.
3
4
Upper Guide Upper Guide
5
Right Right
Curtain Curtain
Panel Panel
NOTE
• The bracket helps to hold unit securely in place.
Cut the window sash seals to the proper
length. Peel off the backing and attach the
adhesive-backed foam to the underside of the
window sash and bottom of window frame.
Open the window and draw a center line on
the center of the inner sill. Then mark lines
7.5" to the left and right of the center line.
Inner Sill Inner Sill
Room Side Room Side
7.5"
Install the L bracket behind the inner window
sill, as shown. Use the 2 type A screws
provided.
Inner Sill Inner Sill
Outer Sill Outer Sill
7.5
L Bracket L Bracket
Be sure to place bracket edge flush against
back of inner sill.
Foam-PE Foam-PE
(Adhesive backed) (Adhesive backed)
Center Line Center Line
7.5"
Screws Screws
(Type A) (Type A)
Center Line Center Line
7.5
EN
11