Preparation Of Chassis - LG LW5023 Owner's Manual

Preparation of Chassis

1
Align holes between the upper guide and the
top of the cabinet and then install it with 3 type
A screws.
Screws (Type A) Screws (Type A)
NOTE
• The feature may be changed according to the
type of model.
2
Insert the top and bottom rails of the curtain
panels into the upper and lower panel guides
Fasten the curtain panels to the unit with
8 type A screws Fasten screws behind the
curtain panel.
Left Left
Curtain Curtain
Panel Panel
Left Curtain Panel Left Curtain Panel
Screws Screws
(Type A) (Type A)
Curtain Curtain
12
Upper Guide Upper Guide
Right Right
Curtain Curtain
Panel Panel
Right Curtain Panel Right Curtain Panel
Screws Screws
(Type A) (Type A)
Bottom Guide Bottom Guide
NOTE
• Use a long screwdriver to make installing the
screws easier.
• The feature may be changed according to the
type of model.
3
Cut the window sash seals (Foam-PE) to the
proper length. Peel off the backing and attach
the adhesive-backed foam to the underside
of the window sash and the bottom of the
window frame.
4
Open the window and draw a center line on
the center of the inner sill. Then mark lines
7.5" to the left and right of the center line.
Inner Sill Inner Sill
Room Side Room Side
7.5"
5
Install the L bracket behind the inner window
sill, as shown. Use the 2 type A screws
provided.
Inner Sill Inner Sill
Outer Sill Outer Sill
7.5
L Bracket L Bracket
NOTE
• The bracket helps to hold unit securely in place.
Be sure to place bracket edge flush against
back of inner sill.
Foam-PE Foam-PE
(Adhesive backed) (Adhesive backed)
Center Line Center Line
7.5"
Screws Screws
(Type A) (Type A)
Center Line Center Line
7.5
EN