Preparation Of The Chassis - LG LW1024RSMX Owner's Manual

Preparation of the Chassis

1
Align holes between the upper guide and the
top of the cabinet and then install it with 3 type
A screws.
Upper Guide Upper Guide
NOTE
• The feature may be changed according to the
type of model.
2
Insert the top and bottom rails of the curtain
panels into the upper and lower panel guides.
Fasten the curtain panels to the unit with 8
type A screws. Fasten screws behind the
curtain panel.
Upper Guide Upper Guide
Left Curtain Left Curtain
Panel Panel
Screws Screws
(Type A) (Type A)
Bottom Guide Bottom Guide
NOTE
• Use a long screwdriver to make installing the
screws easier.
• The feature may be changed according to the
type of model.
12
Screws (Type A) Screws (Type A)
Right Right
Curtain Curtain
Panel Panel
Screws Screws
(Type A) (Type A)
3
Cut the window sash seals to the proper
length. Peel off the backing and attach the
adhesive-backed foam to the underside of the
window sash and bottom of window frame.
4
Open the window and draw a center line on
the center of the inner sill. Then mark lines 8"
to the left and right of the center line.
Inner Sill Inner Sill
Room Side Room Side
8"
5
Install the L bracket behind the inner window
sill as shown. Use the 2 type A screws
provided.
Inner Sill Inner Sill
Outer Sill Outer Sill
L Bracket L Bracket
NOTE
• The bracket helps to hold unit securely in place.
Be sure to place bracket edge flush against
back of inner sill.
Foam-PE Foam-PE
(Adhesive backed) (Adhesive backed)
Center Line Center Line
8"
Screws Screws
(Type A) (Type A)
Center Line Center Line
EN