Table of Contents
Advertisement
Available languages
Available languages
Installation
1.To prevent vibration and noise, make sure the unit
is installed securely and firmly.
2. Install the unit where the sunlight does not shine
directly on the unit.
3. There should be no obstacles, such as a fence
and wall, within 20" from the back of the cabinet
because it will prevent heat radiation of the
condenser.
Restriction of outside air will greatly reduce the
cooling efficiency of the air conditioner.
,& CAUTION
All side louvers of the cabinet must remain
exposed to the outside of the structure.
4. Install the unit a little slanted so the back is slightly
lower than the front (about 1/2").
This will force condensed water to flow to the
outside.
5. Install the unit with the bottom about 30"~60"
above the floor level.
Cooled air
Heat
IZ_
radiation
Over 20"
Fence
All supporting parts should be secured to firm
wood, masonry, or metal.
• This unit is designed for installation in standard
double hung windows with actual opening widths
from 29"
to 41 ".
• The top and bottom window sash must open
sufficiently to allow a clear vertical opening of 19"
from the bottom of the upper sash to the window
stool.
I:
"
_
j-isash
29" to 41"--_
19"min.
_
,. ,
I
Inner sill
.-J, _wlnaow
1
"_" "1]_< ""/_Offset
26" min.
_
I (Without flame c urtain) /
Owner's
Manual
11
Advertisement
Table of Contents
