Planet VIP-157 User Manual page 16

Voip analog telephone adapter
Hide thumbs Also See for VIP-157:
Table of Contents

Advertisement

#123#
#124#
#125#
#128#
Hint
A
fter confirming the modification you've done, Please click on the Submit button to apply settings and
b
rowse to "Save & Reboot" menu to reboot the machine to make the settings effective.
Connection Type
Fixed IP
DHCP clinet
PPPoE
Please consult your
address related information, and input carefully.
Hint
If Internet connection cannot be established, please check
the physical connection or contact the ISP service staff
for support information.
S
ave Modification to Flash Memory
M
ost of the VoIP router parameters will take effective after modifications, but it is just temporary stored
o
n RAM only, it will disappear after your reboot or power off the VoIP Phone Adapter, to save the
parameters into Flash ROM and let it take e
Reboot button after you modify the parameters.
Check Network Mask
Check Gateway IP Address
Check Primary DNS Server Setting
Check Firmware Version
Please contact your Internet service provider to obtain the
Internet access type, and select the proper network settings
ATA
in
to establish the network connections.
Data required.
In most circumstances, it is no need to configure the DHC
settings.
The ISP will assign IP Address, and related information.
The ISP will assign PPPoE username / password for Inte
access,
ISP personnel to obtain proper PPPoE/IP
IVR will announce the current network mask
of the ATA.
IVR will announce the current gateway IP
address of the ATA.
IVR will announce the current setting in the
Primary DNS field.
IVR will announce the version of the
firmware running on the ATA.
ffective forever, please remember to press the Save &
P
rnet
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vip-156

Table of Contents