Setting Up Security On A Network Powerline Device - Planet PL-501v2-EU User Manual

Setting Up Security on a Network Powerline device

The Encryption Tab will allow users to use one primary computer to control the
Network Key of all units on the home network. Enter both the Remote Device
password in the DAK Password field and the desired Network Key in the field
provided. Click "Set" to save this value to the remote Powerline device. If the
DAK Password is left blank, the Network Key will be saved to the local Powerline
device only.
All Powerline devices must use the same Network Key, or they will not be able to
communicate with each other.
Click Close to exit the PL-501v2 utility.
Setup is now complete.
If your PC is not the device you wish to use with the 200Mbps Powerline Ethernet
Adapter, connect the Ethernet cable from the 200Mbps Powerline Ethernet
Adapter to the desired device.
The 200Mbps Powerline Ethernet Adapter is now ready for using.
15