Table of Contents
Advertisement
PLANET IP PBX user's manual
4.6
SIP Trunk Configuration
A SIP trunk refers to a SIP account on a remote call routing or gateway device. A practical example is
an account at an Internet Telephony Service Provider (ITSP) where a call is routed to a SIP client or
off-ramped to an analog subscriber via PSTN. One could also build SIP trunk to a remote IP PBX to
reach its extensions and PSTN ports.
The SIP TRUNK MANAGEMENT page allows the administrator to configure SIP trunks used by
PLANET IP PBX. Select Trunk -> SIP Trunk, and one can add, edit, and delete SIP trunks. Go to
Service -> IP PBX Service, and click RELOAD to activate changes.
Add a SIP Trunk
Edit a SIP Trunk
Delete a SIP Trunk
Table 4.6 SIP Trunk Configuration Settings
Field
Trunk Identifier
Description
Dynamic Peer
1.
Click the Add New tab.
2.
Enter settings shown in
4.6
3.
Table
.
4.
Click ADD to see the newly added SIP trunk in the Trunk
Identifier.
1.
Click the Trunks tab, and More to see more information.
2.
Edit settings shown in
4.6
3.
Table
in a row.
4.
Click APPLY in the row to update the information.
1.
Click the Trucks tab, and select a trunk identifier.
2.
Click DEL to remove the SIP trunk from the Trunk
Identifier.
Description
A unique number consisting of digits only. Usually give the
phone number issued by the ITSP for consistency.
Arbitrary description information.
Select if the trunk is a passive trunk which means the
Advertisement
Table of Contents
