Chapter 2 Preparations & Installation; Physical Installation Requirement - Planet Internet Telephony PBX System IPX-1900 User Manual

Physical Installation Requirement

This chapter illustrates basic installation of IP PBX
•
Network cables. Use standard 10/100Base-TX network (UTP) cables with RJ45 connectors.
•
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either of a DSL or Cable modem (for
WAN port usage)
Administration Interface
PLANET IP PBX provides GUI (Web based, Graphical User Interface) for machine management and
administration.
Web configuration access
To start IP PBX web configuration, you must have the web browsers installed on computer for
management
•
Microsoft Internet Explorer 6.0.0 or higher with Java support
Default LAN interface IP address of IP PBX is 192.168.0.1. You may now open your web browser, and
insert 192.168.0.1 in the address bar of your web browser to logon IP PBX web configuration page.
IP PBX will prompt for logon username/password, please enter: admin / 123 to continue machine
administration.
Preparations & Installation
:
Figure 2-1. Input prompt
Chapter 2
2