Features And Controls - Briggs & Stratton P2200 Operator's Manual

Inverter generator
Hide thumbs Also See for P2200:
Table of Contents

Advertisement

Features and Controls

Read this Operator's Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
A - Fuel Tank — Capacity of 5.7 L (1.5 U.S. gallons).
B - Choke Lever — Used when starting a cold engine.
C - QPT (QUIET POWER TECHNOLOGY ™) Switch
— Use this switch to turn the QPT on and off.
D - Side Maintenance Cover — Remove to gain
access to the air cleaner and oil service.
E - Recoil Starter — Used to start the engine
manually.
F - 12 Volt DC Receptacle — Use this receptacle with
battery charge cables to charge a 12 Volt battery.
This receptacle is protected by a push to reset
circuit breaker.
G - Engine Switch — Set this switch to ON (I) before
using recoil starter. Set switch to OFF (0) to stop
engine. Also turns fuel valve on and off.
H - 230 Volt AC, 15 Amp Receptacles — May be
used to supply electrical power for the operation
of 230 Volt AC, 15 Amp, single phase, 50 Hz 
electrical, lighting, appliance, tool, and motor loads.
J - Retractable Handle — Press button and pull
handle out to move generator. Press button to push
handle back in.
K - USB Port — Use this port to recharge any USB
powered device.
10
L - Parallel Operation Port — Use this port with
optional parallel operation kit to allow two
generators to run in parallel.
M - Statstation™ LCD Screen — Built in LCD screen
to monitor certain features on the generator. See
STATSTATION™.
N - Grounding Fastener — Consult your local agency
having jurisdiction for grounding requirements in
your area.
P - Spark Arrester Muffler — Exhaust muffler lowers
engine noise and is equipped with a spark arrester
screen.
R - Top Maintenance Cover — Remove to gain
access to the spark plug.
Items Not Shown:
Air Cleaner (under side maintenance cover) —
Protects engine by filtering dust and debris out of
intake air.
Identification Label — Provides model, revision, and
serial number of generator. Please have these readily
available when calling for assistance.
Oil Fill Cap (under side maintenance cover) —
Check and add engine oil here.
BRIGGSandSTRATTON.com.au
R
P
N
M
L
K

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P3000

Table of Contents