Protech Systems BM-0947 User Manual page 57

BIOS Setting
USB transfer
time-out
Device reset
time-out
Device power-
up delay
'
BM-0947 USER S MANUAL
Options
1/5/10/20 sec
10/20/30/40 sec
- Auto
- Manual
Chapter 4 BIOS Setup
Description/Purpose
The time-out value for Control, Bulk,
and Interrupt transfers.
USB mass storage device Start Unit
command time-out.
Maximum time the device will take
before it properly reports itself to the
Host Controller. 'Auto' uses default
value: for a Root port it is 100 ms, for
a Hub port the delay is taken from
Hub descriptor.
Page: 4-17