Entering Setup - Protech Systems BM-0947 User Manual

4-2. ENTERING SETUP

When the system is powered on, the BIOS will enter the Power-On Self Test (POST)
routines and the following message will appear on the lower screen:
Version: 2.15.1226. Copyright (C) 2012 American Magatrends, Inc.
BIOS Date: 05/29/2014 10:09:57 Ver: M9470TH6
Press <DEL> or <F2> to enter setup.
As long as this message is present on the screen you may press the <Del> key (the one
that shares the decimal point at the bottom of the number keypad) to access the Setup
program. In a moment, the main menu of the Aptio Setup Utility will appear on the
screen:
'
BM-0947 USER S MANUAL
POST screen
Chapter 4 BIOS Setup
Page: 4-4