Lighting Features; Entry Lighting - Cadillac CT6 2017 Owner's Manual

Hide thumbs Also See for CT6 2017:
Table of Contents

Advertisement

168
LIGHTING
Press the lamp lenses over the rear
passenger doors.

Lighting Features

Entry Lighting

Some exterior lamps and most of the
interior lights turn on briefly at night,
or in areas of limited lighting when
is pressed on the Remote Keyless
Entry (RKE) transmitter. See Remote
Keyless Entry (RKE) System Operation
0 29. When the driver door is opened,
all control lights, Driver Information
Center (DIC) lights, and door pocket
lights turn on. After about 30 seconds
the exterior lamps turn off, then the
remaining interior lights dim to off.
Entry lighting can be disabled
manually by changing the ignition out
of the OFF position, or by pressing
on the RKE transmitter.
This feature can be changed. See
Vehicle Locator Lights under Vehicle
Personalization 0 152.
Entry Lighting with Approach
Detection
If equipped with approach detection,
the entry lighting feature will
automatically turn on when the RKE
transmitter is detected within
approximately 2 m (6 ft) of the vehicle.
If the vehicle has remained parked for
an extended period of time with no
RKE transmitter use or Keyless Access
operation, approach detection will be
disabled. To reactivate, press any
button on the RKE transmitter or
open and close all vehicle doors to
re-enable the entry lighting feature on
approach.
Approach detection will not work if:
The vehicle battery is low.
The ignition is in ACC/ACCESSORY
or ON/RUN.
Entry lighting is set to OFF in
Vehicle Locator Lights . See
Vehicle Personalization 0 152.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents