Table of Contents
Advertisement
3. Remove the adapter or blank filler and ensure that the handle is in the up position. If you need to
move the handle, ensure that the locking bar is pulled into the unlocked position, and then rotate the
adapter handle until the handle is in the up position (the cassette linkage assembly will extend down
beyond the cassette top).
If you are installing a short adapter or blank filler, go to "Short Adapter or Blank Filler Installation." If
you are installing a long adapter, go to "Long Adapter Installation" on page 79.
Short Adapter or Blank Filler Installation
To install a short adapter or blank filler, do the following:
62
Eserver pSeries 670 Installation Guide
1
2
1 Handle Release Lever
2 Lock
Advertisement
Table of Contents
