Table of Contents
Advertisement
BIOS Setting
Pending operation
Device Select
TPM Enabled
Status
TPM Active Status
TPM Owner Status
BA-2501 SERIES USER MANUAL
Options
- Enabled
- None
- TPM Clear
- TPM 1.2
- TPM 2.0
- Auto
No changeable
options
No changeable
options
No changeable
options
Chapter 5 BIOS Setup
Description/Purpose
Your Computer will reboot during restart in
order to change State of the Device.
Schedules an Operation for the Security
Device. NOTE: Your Computer will reboot
during restart in order to change State of
Security Device.
TPM 1.2 will restrict support to TPM 1.2
devices, TPM 2.0 will restrict support to TPM
2.0 devices, Auto will support both with the
default set to TPM 2.0 devices if not found,
TPM 1.2 devices will be enumerated.
Displays the TPM Enabled Status.
Displays the TPM Active Status.
Displays the TPM Owner Status.
Page: 5-13
Advertisement
Table of Contents
