Table of Contents
Advertisement
5.4.10
Advanced – Network Stack Configuration
Menu Path
The Network Stack Configuration allows users to enable/disable UEFI Network
Stack, IPv4/IPv6 PXE (Pre-Boot Execution) support and configure PXE boot wait
time and detects the media presence.
PXE allows a workstation to boot from a server on a network prior to booting the
operating system on the local hard drive. A PXE-enabled workstation connects its
NIC to the LAN via a jumper, which keeps the workstation connected to the network
even when the power is turned off.
BIOS Setting
Network Stack
Ipv4 PXE Support
Ipv6 PXE Support
BA-2501 SERIES USER MANUAL
Advanced > Network Stack Configuration
Network Stack Configuration Screen
Options
- Disabled
- Enabled
- Disabled
- Enabled
- Disabled
- Enabled
Chapter 5 BIOS Setup
Description/Purpose
Enables or Disables UEFI Network
Stack.
Enables Ipv4 PXE Boot Support. If
disabled, Ipv4 PXE boot option will
not be created.
Enables Ipv6 PXE Boot Support. If
disabled, Ipv6 PXE boot option will
not be created.
Page: 5-30
Advertisement
Table of Contents
