4.2
Installing Intel
Introduction
®
The Intel
Chipset Software Installation Utility installs the Windows
*.INF files to the target system. These files outline to the operating
system how to configure the Intel chipset components in order to
ensure that the following functions work properly:
Core PCI and ISAPNP Services
•
PCIe Support
•
SATA Storage Support
•
USB Support
•
Identification of Intel
•
Intel® Chipset Software Installation Utility
The utility pack is to be installed only for Windows 7 (32/64-bit) /
Windows 8.1 (64-bit) / Windows 10 (64-bit), and it should be
installed immediately after the OS installation is finished. Please
follow the steps below:
Connect the USB DVD-ROM device to BA-2501 and insert the
1
driver disk.
Enter the Main Chip folder where the Chipset driver is located
2
(depending on your OS platform).
Click Setup.exe file for driver installation.
3
Follow the on-screen instructions to install the driver.
4
Once the installation is completed, shut down the system and
5
restart BA-2501 for the changes to take effects.
BA-2501 SERIES USER MANUAL
®
Chipset Software Installation Utility
®
Chipset Components in the Device Manager
Chapter 4 Software Utilities
Page: 4-4