Table of Contents
Advertisement
III. BIOS Update Procedure
Boot into EFI Shell, change to the path where you put BIOS
1
image and AFUEFIx64.
Shell> fs0:
fs0:\> cd afuefix64
"AFUEFIx64 25010Pxx.bin /p /b /n /x" and press enter to start
2
the flash procedure. (xx means the BIOS revision part, e.g.
W2...)
During the update procedure, you will see the BIOS update
3
process status and its execution percentage. Beware! Do not turn
off the system power or reset your computer if the whole
procedure are not complete yet, or it may crash the BIOS ROM
and the system will be unable to boot up next time.
After the BIOS update procedure is completed, the following
4
messages will be shown:
Restart the system and boot up with the new BIOS
5
configurations.
The BIOS Update is completed after the system is restarted.
6
BA-2501 SERIES USER MANUAL
Appendix A Technical Summary
Page: A-19
Advertisement
Table of Contents
