Table of Contents
Advertisement
BIOS Setup
Integrated Peripherals
The Integrated Peripherals option changes the values of the chipset
registers. These registers control system options in the computer.
Note:
Change these settings only if you are familiar with the Chipset.
Run the Integrated Peripherals as follows.
1. Choose ÒIntegrated PeripheralsÓ from the Main Menu and the
following screen appears.
settings:)
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA : Auto
IDE Secondary Slave UDMA
On-Chip Primary
On-Chip Secondary PCI IDE : Enabled
USB Keyboard Support
KBC Input Clock
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
2. Use the arrow keys to move between items and select values.
Modify selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
On-chip IDE First
Channel/
On-chip IDE Second
Channel
IDE Prefetch Mode
IDE HDD Block Mode
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
PCI IDE : Enabled
: Disabled
: 12MHz
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: Normal
Enabled Ð Use the on-board IDE
Disabled Ð Turn off the on-board IDE
Use the default setting.
Choose Enabled (default) or Disabled.
Enabled invokes multi-sector transfer
instead of one sector per transfer. Not all
HDDs support this function.
(The screen below shows default
RxD, TxD Active
IR Transmittion Delay
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
EPP Mode Select
ESC : Quit
F1
: Help
F5
: Old Values (Shift)F2 : Color
F6
: Load BIOS Defaults
F7
: Load Setup Defaults
(default)
: Hi, Lo
: Enabled
: 378/IRQ7
: ECP+EPP
: 3
: EPP1.9
↑ ↓ → ←: Select Item
PU/PD/+/– : Modify
33
Advertisement
Table of Contents
