Getting Started; Sim Card And Battery; About Your Sim Card - Pantech P6020 User Manual

Getting Started

SIM card and battery

About your SIM card

When you subscribe to your network operator, you receive
a SIM (Subscriber Identity Module) card containing your
registration information, PIN code, etc.
Like a credit card, it should be kept secure and handled
carefully. Do not bend, scratch or expose it to moisture. Avoid
static electricity.
To avoid corrupting your SIM card's memory, always turn off
your phone before removing or inserting your SIM card.
About your battery
Your phone uses a Li-Ion battery. Make sure to use an
authorized battery and charger only. For more details, please
inquire at your nearest dealer.
Note Unlike other forms of battery technology, you can recharge
a Li-Ion battery while some charge remains without reducing your
phone's autonomy due to the "battery memory effect" inherent in
those technologies.
Installing/Removing SIM card and battery
1. Remove the battery cover from
the unit.
- To remove the battery cover,
place your finger nail in the
groove at the bottom of the
unit, and then lift it up.
2. Insert the SIM card into the slot.
The gold contacts of the SIM
card should face down.
3. Slide the connector of the
battery into the notch located
at the top of the unit. Insert
and press the lower side of the
battery until you hear a click.
Make sure you align the gold
contacts on the battery end with
the contacts on the phone. If the
contacts on the battery are not
properly aligned, the phone and
the battery could be damaged.
17