Table of Contents
Advertisement
Step 1 - Mounting the Monitor
The back of the LX1200TI includes a mounting interface that you can use to
mount the monitor on a swing arm or other LCD monitor fi xture, as follows.
IMPORTANT – For optimal results, use the M4 mounting holes around
!
the edges of the monitor.
1. Mount the fi xture in its planned location according to the instructions
included with the fi xture.
2. Attach the monitor to the fi xture using the attachments on the back of
the monitor, shown in the following diagram.
Note: Use only a Planar-approved mounting bracket for in-vehicle use.
Mounting bracket and hardware are not included with the monitor,
and must be obtained separately.
Use the proper M4 x 0.7 screws for attaching the monitor to the
mounting fi xture.
For low-vibration environments, the back of the monitor includes a
VESA Standard 100mm mounting pattern.
12
LX1200TI User's Guide (020-0512-01A)
Advertisement
Table of Contents
