Advertisement
Items Supplied
Optional
• POSlTlP 850 Display Unit for 4 Axes
• Power Cable
• Operating Instructions
• Certificate of Inspection
• Connector.
25-pole. for
D-subminiature socket
X41
1EXT)
external functions (ld.'Nr. 249154lYl
• Data transfer cable. 25-poIe. for D-subminiature socket X31
data output (Id.-Nr. 24286901)
• KT 110 Edge Finder (ld.-Nr. 251021011
• Angle bracket (ld.-Nr. 258261011
Selecting Millingrrurning
As
delivered. the POSlTlP 850 can be set up for either milling
Of
turning applications. The following screen appears after the
first power-up:
HEIDENHAIN
POSITIP 850
Manufacturer's
Certificate
We hereby certify that the above unit is radioshielded in ac-
cordance with the German official register decree 1046/1984.
The German postal authorities have been notified of the issu-
ance of this unit and have been granted admission for exami-
nation of the series regarding compliance with the regulations.
After pressing the
IQ]
key. the program for milling
is
perma-
nently set (i. e..
is
not affected by power interruptions). and thiS
screen display cannot be accessed agaIn. $election of the
turning function IS then only possible via parameter P99.0 'Mil-
ling. Turning'.
General Information
G1
Advertisement
