JVC MX-J270V Service Manual page 7

Removing the front panel assembly
Prior to performing the following procedures, remove
the metal cover and the CD changer mechanism
assembly.
1. Disconnect the card wires from connector CN302,
CN306, CN307 and the harness from CN301,
CN305 on the inside of the main board.
2. Turn over the body and remove the four screws E.
3. Release the joint d and e on both sides of the body
using a screwdriver, and detach the front panel
assembly toward the front.
(See Fig.8 to 11)
Main board
CN305
CN301
CN302
CN312
Fig.8
(Bottom)
E
Fig.9
Joint d Front panel
assembly
Fig.10
Front panel Joint e
assembly
Fig.11
MX-J270V
CN306
CN307
Front panel
assembly
1-7