JVC MX-J270V Service Manual page 15

Removing the CD mechanism
assembly
1. While turning the cams R1 and R2 assembly in the
arrow direction "h", align the shaft "i" of the CD
mechanism assembly to the position shown in Fig.10.
2. Remove the four screw F retaining the CD mechanism
assembly.
Removing the CD mechanism
1. For dismounting only the CD mechanism without
removing the CD mechanism assembly, align the shaft
"j" of the CD mechanism assembly to the position
shown Fig.11 while turning the cam R1 and R2
assembly in the arrow direction "k".
2. By raising the CD mechanism assembly in the arrow
direction "l" , remove the assembly from the lifter unit
Cam R1, R2 assembly
j
Fig.11
Removing the CD pick unit
1. Move the cam gear in the arrow direction m . Then, the
CD pickup unit will be moved in the arrow direction n .
2. According to the above step, shift the CD pickup unit to
the center position.
3. While pressing the stopper retaining the shaft in the
arrow direction o , pull out the shaft in the arrow
direction p .
4. After dismounting the shaft from the CD pickup unit,
remove the CD pickup unit
(See Fig.10)
(See Fig.11 and 12 )
(See Fig.12).
k
Arrow
(See Fig.13 )
Cams R1, R2 assembly
Arrow
h
i
F
F
CD mechanism assembly
Fig.10
Lifter unit
CD Pickup unit
Shaft
o
p
Stopper
Fig.13
MX-J270V
F
F
CD mechanism
l
Arrow
Fig.12
n
CD mechanism
m
Shaft
Cam gear
Shaft
Stopper
1-15