Philips HP6515 User Manual page 12

EnglisH
1
 Place the shaving head on the appliance and press it onto the
appliance until it snaps home ('click') (Fig. 13).
5 Insert the appliance plug into the bottom of the appliance and put
the adapter in the wall socket.
6 Switch on the appliance by selecting speed II.
7 Place the shaving head onto your skin and move the appliance
slowly and smoothly against the direction of hair growth. Press the
appliance lightly (Fig. 14).
using the peeling glove
Use the peeling glove in the shower.
Regular massages with the peeling glove may help to prevent ingrown
hairs. Do not use the peeling glove immediately before or after epilation.
cleaning and maintenance
Never rinse the adapter or the appliance itself with water.
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
1 Make sure the appliance is switched off and disconnected from the
mains.
 Remove the leg skin cooler from the appliance and slide the
insulating sleeve off the skin cooler.
 Clean the pivoting cooling head of the leg skin cooler with the
brush supplied or with a moist cloth after each use.
Make sure the outside of the skin cooler is completely dry before
you freeze it again.
cleaning the epilating head
Clean the epilating head after every use.
1 Make sure the appliance is switched off and disconnected from the
mains.